To build a conference bridge:

 

  1. As an "office manager" level user, click the "conferences" icon
  2. Then click the "add conferences" button at the top right
  3. Name the bridge, give it an available extension number, assign leader pin and participant pin, as well as max participants and the options as seen below.  If you have available numbers, you can select them from the drop down to ring directly to the conference bridge.
  4. Click "save" when done.  The bridge should be ready for use.

 

Using a conference bridge

  1. Dial the direct number (if applicable) or extension of the conference bridge
  2. The moderator will enter the moderator pin and follow the voice instructions, while standard participants will use the participant pin. 
  3. When you have an active conference call, you can click the number of participants in the portal to view realtime conference bridge info, invite participants, and mute/disconnect unruly users as seen below.